In The Future There Will Be Robots!

I just wanted to show off some of the toys we have amassed for our Mecha project for Station 42.  I've already shown one of the mechs with the Titania Planetary Guard update.  Here are some of the others.  Many if not all of these will make and appearance in our "Station 42 War" campaign.
We will still be using "No Limits" as our rules which will make it easy to create stats for these models but we will also be adding several house rules and some new equipment which I will publish as the project progresses.  Eventually I would like to pick up some nicer models but for now we are using these to kind of test out our rule ideas.

Hell Knights Regulars Rifle Squad

I just finished assembling a Hell Knights rifle squad.  This is the third squad I have put together with the pig Iron heads which I chose for this army.  These guys take quite a while to assemble because I have to shave off all the Imperial symbols and fit the heads.  I'd say they take almost an hour each.
This squad I am going to paint as a squad of "regulars".  The other rifle squad I have painted and the one I have base coated are veteran squads.  In order to tell the difference I am going to base these in olive green instead of dark brown and I don't think I will be doing these with a camouflage pattern.  Their web gear and other equipment will stay the same color as the other squads which should tie them in.
Eventually I want to have a whole platoon of three Regular squads and three Veteran squads.  I have enough models to do one more rifle squad so I will have two squads of each until I can afford to pick up a couple more squads and at GWs prices that may be a while.  

More Titania Planetary Guard Reinforcements

Hey I'm working on another tank for the Titania Planetary Guard and a new Battle Mech as well.  The Mech is a M.A.R.S. toy that I got at Walgreens.  It is about 7 inches tall and I got three different mechs for about $14.00.  They are a little on the chunky and static side but I like their styling.  I still have weathering, a wash, and final details to go on both of these.

General Drake and a Medic for the Titania Planetary Guard.

I've had a General Drake figure from Reaper Miniatures Chronoscope line ever since he came out.  He's a nice miniature but he's a bit on the tall side.  I think Reaper made him for ACOM which was suppose to be a 28mm game set in their CAV universe and I think they had planned to do all their models as 1/48th scale.  Anyhow I painted him up to be the leader of the renegade Titania Planetary Guard units for our Station 42 War campaign.
The "medic" is actually a pulp era "not" Laura Croft which I think I got off of Cool Mini or Not.  I don't really remember any other details about her.  She's a pretty nice mini but I have no idea who sculpted her.
I panted this pair up real quickly using the same technique we used for the rest of the army.  Nothing fancy but serviceable.   

Anti Grav AFV almost done!

 I'm just about done with this project!  All I have left is a to make an automated weapons mount for the spot where I removed the machine gun and I have one more hole to cover in the hull that I missed before I snapped these shots.  I should have it painted soon.

Anti Grav Assault AFV Work in Progress

A while back I made this post about a toy AFV I found at Dollar General.  It's a pretty big sucker especially with those wheels.  For the last couple days I've been working on futurising it.  I replaced the wheels with some odd looking pencil sharpeners that represent the anti grav drive.  I also replaced the gun with a scratch built laser canon made from the guts of a mechanical pencil and some wooden beads.  I also cut off all the gas cans and mufflers and other inconsistent bits. 

This is suppose to represent a super heavy AFV designed to transport heavily armored troops into the thick of a battle and then act as support for them.  It's basically the equivalent of a Land Raider for Warhammer 40k. 

I've still got some detailing to do to cover up the holes that resulted from removing the details.  I'm going to cover them up with tech bits but since I want to be able to make more of these I'm going to try and stick with easily acquired items.   

Scratch built APCs finished!

We finished up the three anti grav APCs.  I'm really happy with the results!  I thought I should show them with some troops. 

Three little AFVs

Well I have all three of my cardboard AFVs to the same stage of painting.  I also put a wash on them after I took this picture.  The wash got a little dark but I think I will be able to fix them.  I'm still really happy with them.  I should have them done completely tomorrow. 

Scratch built APC painting WIP

 Just a quick update.  I've got the base paint job done.  Now I just need to add battle damage and a wash then go back in and add the final details.

We have two more of these in the works at the moment and we plan to make a few more.  We even have a tank body we are working on as well as a staff car and a couple trucks.

Scratch built anti grav vehicle!

 We built the hulls for a few anti gravity vehicles a couple months ago for our Station 42 War campaign but we shelved them because we thought we might find a better alternative.  Unfortunately we did not find many alternatives that we felt we could afford.  In fact only a few companies make anti grav or hover AFVs in 28mm.  There are a hand full of hover or anti grav tanks but very few APCs and they are almost all quite expensive resin cast models.  To top that off most of those models that are out there are made by small companies in the U.K. and shipping is also quite high.

 My wife made the hulls and added the hatches and windows and plating then I added the details.  I'm calling it a Light Anti Grav Armored Reconnaissance Vehicle or "Lagarev" for short.  It's intended role is somewhere between that of a Humvee and an M113 APC.  It's a lightly armored multi role vehicle not intended for front line combat.  It is however very fast and can carry a variety of support weapons.

 Most Lagarevs are also drone rigged so they can be piloted remotely from a remote base well behind the front lines although the drone drivers and gunners are usually less effective than trained crew this feature allows the Lagarev to deploy troops then return for a pickup without the need for a crew.  It also makes it easier for comrades of wounded troops to provide medical assistance during evacuation rather than be concerned with vehicle operation.

 Here is a shot of the front of the vehicle.  I'm not totally satisfied with this angle.  It doesn't look very interesting but I may add some stowage when I finish painting the model.

 Here is a rear shot.  It's slightly better looking than the front.  I think I'm going to paint the zip tie strips I used for detailing up as light bars rather than adding traditional headlights.

 Here is a shot of the anti grav drive made mostly from disposable razors and zip tie bits.  There is also a piece of plastic canvas between the drives to add some more detail to the bottom of the model.  I figure if I need to flip them on their side to show they are wrecked I don't want just a plan underside.

Here is a shot of the weapon mount with a different weapon.  I have several of these that I got from a set of cheap toy robots.  They are intended to be shoulder mounted on the robots but I like the look of them as automated weapons.

I've considered going in and trying to clean these up with some putty but they kind of are what they are and I need to have the three we have started done by Sunday for a game so it's unlikely I'll do any more detail work.

I'll be painting these in my Hell Knights cammo pattern with markings.  I'm hoping that will make them look a bit nicer.  All in all though I'm pretty happy with the results especially since these are made from scrap cardboard and junk.  They probably cost less than a dollar in materials.

Another Pleasant Valley Sunday......

Hey folks we have started working on Pleasant Valley which is a small town near Station 42 for our generic Sci-Fi setting.  This is a basic "test" layout.  We are going to build a raised shuttle landing pad in the bare front corner of the table.  Of course we will be using vehicles, barrels, crates, and other scatter terrain to fill in as needed.  I hope we can wrap this one up in the next couple of weeks so we can use it for our Station 42 War campaign.  

100 bottle cap barrels

Sometimes we do something completely insane for our games.  This last weekend we put together and finished 100 bottle cap barrels.  Before we had about 35-40 so this will provide us with a lot more scatter terrain for our games which is important because our Station 42 table is 5'x12'.

Our other barrels are all generic so we decided these should have corporate labels as well as warning labels. Cutting out and pasting on the labels was by far the hardest part of the project.  We cut and pasted literally hundreds of them.

You might recognize some of the fictional corporations we used.  Not bad for a weekend project I guess.  These are part of a larger supply depo project we are working on.  Next up will be some other containers and we hope to have some large shipping crates as well.  We already have a lot of labels printed out.

The Advantages of Playable Terrain

 One of the things we have been doing with the Station 42 project is that we are making all of the buildings as playable as we can.  That is we have buildings that can be opened up and furnished so we can put miniatures inside.  We've found this is extremely helpful in making the terrain more useful for different types of games. 

 There are a lot of excellent terrain products and scratch built projects that look amazing but are not very playable.  For some items that is ok but for larger buildings especially that can make a beautiful piece of terrain far less useful.  I've got a number of buildings on my terrain shelves that look cool but aren't that fun to game on because they just become big blocking pieces of terrain.  Like square cliffs. 

 Big non-playable buildings are especially frustrating when you are playing skirmish games or role playing games.  Having interiors can be a lot more dynamic and fun when you are doing small scale battles.  If the heroes duck inside a building you can just open it up and continue to play rather than move to a map or try and just position the minis on top of the building. 

 However even in larger scale battle having buildings that can open up for play can provide for my interesting situations for snipers, scouts, and skirmishers. 

 There are some things to keep in mind when designing playable buildings.  For one thing you need to make sure you can get enough miniatures in them and that the interior details and furnishings allow enough room for a reasonable number of miniatures to move around in.  A good thing to do is to keep most of the furniture up against the wall in smaller buildings.  Doorways should be larger than is realistic to better accommodate based models although sometimes you will just have to pick a model up and place them on the other side of the door if the have too large a base. 

 Multi story buildings get pretty complicated.  The upper floors need to be more simply furnished than the lower floors because you will have to move them around more.  Also on very large buildings you may want to only make the lower and upper floors playable or perhaps every few floors.  It can be assumed that the floors in between are of a similar layout. 

Remember to keep your construction simple and durable.  Playable buildings are going to be handled a lot more and they aren't going to be as supported as a non-playable building.  Furnishings and interior details need to be small enough that they don't hinder play.  If you keep your interiors simple you can change out finishing to change the look of the building.  Wall details can be held in place with sticky tack as well as floor details like rugs. 

More Sci-Fi signs now at Station 42

 Well I made several more signs from trading card holders and I put them up around Station 42 since I was setting it up for a game anyway.  I even made some signs for some of the buildings which I think turned out pretty good. 

 Here's a close up shot of some of the advertisements and a building sign.  Hopefully I'll have stage 2 of Station 42 done soon.  We are trying to get all the signs done and finish all their interiors.

Speaking of interiors here is a shot of Rosie's Workshop with furniture and some data screens I made using the same method as the signs. 

Here's another shot.  I tried to make the displays look as if they had several windows open on them.  I'll try and get better shots of the screens up soon.  I'm really happy with the way they turned out. 

Sci-Fi Billboard update!

 I knocked out a couple billboards from the trading card display protectors I picked up.  I glued the protectors to some cheap shaving razor guards to make bases for them.  I'm even thinking about gluing them to magnets so I can stick them to metal railings and signpost.  I've used parts from these cheap razors in a number of projects. 

 I found some "Futurist Fashion" images from a quick google search then made a simple logo for the fake fashion design company "Alejandro of Titan" in photoshop.  This isn't my most futuristic set of buildings and I know that these ads in particular look a bit out of place but you get the idea. 

I printed these out on some luster photo paper then cut them out and slid them into the protectors.  I made two "posters" for each billboard.  In the future I plan to glue the images together to make them a little easier to deal with and look a little cleaner but These are just test subjects.

One word of warning.  You need to be very careful that you keep your work surface clean when using these card display protectors or any other clear plastic items.  I messed up one of my heavy duty protectors because I accidentally laid one of the pieces in a small drop of super glue that I got on my work table.  I think I can salvage it as a distressed display or I might set it up to be one sided and mount on the side of a building or something. 

Sci-Fi Terrain bits

 The Station 42 project has all but spiraled out of control which was to be expected.  Instead of doing one big spaceport project we are doing one big spaceport project and a number of other locations around the spaceport creating a mini setting.  I guess this is to be expected and it's kind of a cool thing.  After all the big project is coming along nicely but it's still a 5x12' table so it's not the most practical thing to have regular games on.  Still because of the modular nature of the designs we are working with it is providing us with a lot of use.  One of the things we have been needing to work on though are detail bits.  We have managed to put together a lot of buildings but we don't have a lot of smaller detail bits or furniture for those buildings.  We have some that we have purchased and scratch built but we need more.  The goal is to make these bits as modular as possible too. 

 We have a number of these smaller adobe structures we built out of cork tile we are working on.  We plan to use them for a lot of different locations.  They are very plain however and we were looking to spice them up with some tech bits.  Here is an example of some tech bits made from junk.  We built little platforms that we can slide right up against the building so it will look integrated and be highly modular.  Also we can put these pieces out as stand alone terrain bits.  On larger buildings they can even be set on top. 

 Here are four that I made that have identical construction.  I often use the design principle of unity and variety when thinking about miniatures and terrain. 

 Here is a shot of a number of our adobe buildings with some work in progress modular tech bits as well as some of the other storage/chemical tanks and other smaller terrain bits we have been working on. 

 Stage one of the painting.  I hope to make a large number of these for use with my terrain sets.  I want to make some larger and some smaller sets to add to the versatility of my terrain.  Little projects like these can add a lot of detail without adding a lot of storage problems.  It's easier to make one building with several modular bits than make 10 buildings that only look one way when you set them on the table. 

 Here are some simple wooden tables we made.  All of our buildings open up for play so we need a lot of furniture.  There are several lines of pre-made furniture out there but we are going to need a large volume of furniture so we are going to have to resort to scratch building to fill in the gaps.  These are for a sci-fi setting even though they are wood.  They could represent either nicer actual wood furniture or fake wood furnishings.  That brings up another thing.  Don't discount any fantasy or historic furniture you might have in your collection for Sci-Fi settings.  You can find uses for it because furniture designs have a long life span.

 Another detail I'm working on is signage and billboard advertisements.  I was looking for a way to make them highly modular and easy.  I got the idea to pick up some cheap acrylic photo frames and some plastic trading card sleeves.  I plan to make adds using photoshop and them sliding them into the frames.  I'm going to use different methods to attach them to my buildings and also make some stand along billboards.  Being able to change out the art will make them highly modular. 

Here is a detail shot of the two types of card protectors.  The one of the left came in a pack of 35 for less than $3.00 and the acrylic one was $1.29.  They are designed to hold collector cards like sports cards. 

Legends of the Gold Sea Costal town tavern WIP

 We started working on the "Legends of the Gold Sea" project.  The first project will be a small costal town.  This is the tavern we are working on.  It will have a small staff. 

 It measures about 8x6" and it's about 3" tall.  Most of the buildings in the town will not be overly large.

Next up will be a small temple. 

Reaper Dwarf Fighter

This is the first fantasy miniature I've painted in quite some time.  The figure is a dwarf fighter from Reaper Miniatures.  I took a little more time on him since he is going to be a well known npc in the region we are starting out fantasy campaign project in. 

Fantasy Project "Legends of the Gold Sea"

We are starting a new Fantasy project similar to the Station 42 project.  We are going to focus on a geographic area called "The Gold Sea".  Our first project will be a small coastal village but we will also be building up to a large port city.  This is going to be a pretty generic fantasy setting with a very Mediterranean feel. 

The Gold Sea is named not for it's color but for the massive amount of trade that goes on along it's coast.  It is the richest area in the world and a cultural melting pot.  All manner of fantasy races and monsters will be a part of the setting.  It will be a place of wealthy city states, pirate kingdoms, and clashing empires. 

We plan to create the setting in several different ages.  We will have an Ancient Age, a Dark Age, a Medieval Age, a Renaissance, and an Age of Exploration.  We will accomplish this by making terrain that can be changed out in each location to show the changing times.  We will likely start in the late Dark Age or early Medieval Age. 

This will of course be a long running project so we are starting with a coastal town terrain set that we plan to fit on a 4x4' or 4x6' table. 

Look at the size of that thing! Is this toy too big?

 I recently picked up a "Victorious Mission" military play set from a local Dollar General for $8.00.  Actually I got a couple different ones.  One of them had this large AFV which looks a bit like a Stryker.  I want to used this for 28mm games but it's pretty large.  About 8 inches long and 3and a half inches wide.  It's clearly meant for larger scale figures.  The figures that came in the set were the typical 54mm sized army men. 

It doesn't really look that bad to me and there are larger sized tanks and troop transports on the market right now like the new Land Raider from Games workshop.  Also "Super" tanks and AFVs are common in many sci-fi settings.  I'm pretty sure I'm going to end up using it because it's just such a good deal even though it's a bit on the large side.  I'm just looking for some feedback from other gamers.